Skip to main content

Bahn camper works. Moving campers into modern construction.



I have been interested in RV's for a long time. Over the years I have noticed they tend to built incredibly cheaply with a few notable exceptions (air streams, certain fiberglass campers, bus conversions). The most common build is basically stick built with sheathing hung on wood framing. you also then have some with aluminum framing. You have also had a number made with fiberglass, much  like how a boat is constructed with a top and bottom section molded and then bolted/sealed together.

One of my personal favorite types of RV is the truck camper. Having a removable living section and a truck to tow some other toy like a boat or ATV seems ideal. One issue these campers have is that weight is a major issue. Pickups have limited payload and truck campers often push the limits of these payloads. These would make them ideal candidates for lightweight composite construction with cored composites. While there are fiberglass camper builders out there making outstanding products they seem to stop short of using the most up to date weight reductions methods available.

Enter Bahn camper works. They are using cored composite panels bonded into a single structure. Which makes for an excellent light weight and long lasting construction. While I don't completely love their layouts and designs it's nice to see some real innovation on the weight and construction of truck campers. Looking forward to see how they move forward. Also to see some more custom designs as they offer bare shells for either custom or DIY builds.

For more information see Bahn Camper works.

Comments

Post a Comment

Popular posts from this blog

Interesting boat Albin 24 Getaway

1990's Albin's why do I like you so much. There just something about the classic but up to date styling, with a good dose of practicality that's just hard to ignore.  The 24 is an oddball in some respects with a relatively few examples (48) made for a 24 footer. It's basically a scaled down version of the 31-34 foot command bridge models Albin built over the years. Having the raised helm area nets you more cabin in the larger boat.  Here it gets the engine under foot instead of in a box in the cockpit, as would normally be the case on a 24 foot boat with a straight shaft inboard.In actuality the straight shaft is one of the more unusual parts of this boat. While the arrangement was common in the pre stern drive era, it was very uncommon by the early 90's. The only other production cabin boat under 26' with an inboard of the time period I can think of is Shamrock (I'm sure there are others but I'm not going to spend all day finding them).  In the ...
3 comments
Read more

Mid-size pickup bed and payload comparison

Mid-size trucks, they were a thing in the 90’s thru about 2010 when the segment collapsed (lack of new product didn’t help). Well now they are a thing again. Over the past 5 years or so (starting with the release of GM’s current generation Canyon/Colorado twins) with Tacoma, Colorado/Canyon, Frontier, Gladiator and Ranger making large year over year gains in many of those years. One of the biggest reasons for the increase of sales in the segment is using the trucks as lifestyle vehicles (which has always been the compact / midsize trucks biggest draw) the increase in overlanding style off-roading, camping, boating, fishing, kayaking, biking, and many other outdoor activities has people looking for a vehicle that’s small enough to drive everyday while still being able to handle all their other duties on the weekend. Filling the bed or towing toys are some of the biggest truck uses. While we can get into towing another time, I think it would be a good idea to compare and contrast the ...
Post a Comment
Read more

Aistream B 190 Class B motorhome

  The Airstream B190 is a somwhat uniquie Class B motorhome made between 1989 and 1999. The B 190 was made on a Ford Econoline E350 one ton van. The Fiberglass top section was made by Okanagan to start with, later ones being made by airstream themselves. Okanagan made baiscally the same vans as the B190 startng in the early 80's. The most interesting thing about these vans is they are a true Class B with van sides but feature a upper bunk above the drivers area. Few others have ever done this design. I like the design for operning up more space even if the bunk has limited headroom.  These bridge two generations of econoline vans so the early ones are more square before the aero style econoline updates were introduced in the early 90's. These also featured a number of Ford engine options over the years. The 351 V8 was standard The 460 big block V8 was an option and in some of the early years a pre powerstroke 7.3 diesel was available. Later in the aero years the V10 triton was...
Post a Comment
Read more